Imagine that, sometimes, one, two, or three chargers can simultaneously charge multiple power devices. Obviously they cannot be satisfied at the same time. If they can, they need multiple outlets, and they can be charged in multiple places and dispersed. Well managed. In addition, the interface is not the same, some are mini USB, some micro USB, some Lighting, some are dedicated such as microsoft band, garmin fenix, tomtom multi-Sport Cardio, etc., certainly in the constant use of the charger constantly plug, pull the conversion line Sometimes it's really annoying...
To find out, there is a 6-port USB charger that can charge multiple electrical devices at the same time. But think about it, if you don't use the original one, buy another one, and use it with confidence, you must also buy an excellent quality job. Isn't it a waste of money? Think about constantly inserting and pulling conversion lines. Or endure it, save the noodles for two weeks to solve it...
Selected to go to the election, saw smzdm.com recommended, in the United States and Asia selected an Anker QC3.0 6-port USB charger, $26.99, about 180 yuan, take the Quartet, 66 discount coupons, about 20 yuan freight, 21 yuan tax (Value friends have no way to exempt from taxes, previously not lower 50 free), the total cost is 221 yuan, not expensive, not cheap, the price is so-so!
Features 6 ports, 1 is to support QC3.0 fast charge, and the other 5 are Power IQ support 5V 2.4A speed speed charge, all with line compensation (buck compensation), the key charger quality is known as defective.
To map:
Exquisite packaging, is a bit of this.
3 icons, PowerIQ, Speedometer, VoltageBoost, Buck compensation, Multiprotect, 7-fold security protection.
VoltageBoost Buck compensation, we are commonly called line compensation. The general idea is to ensure that the voltage 5V during the entire charging process does not decrease, does not decrease with increasing current, nor does it reduce the voltage due to the use of other USB ports, and the output power comes to an end, ensuring the charging quality.
For chargers without line compensation, the voltage is 5V at no-load. As the charging current increases, the voltage will continue to decrease. With good quality, it is only 4.9V, 4.8V, which can not reach 5V; for some dummy power The voltage is reduced to 4.7V, 4.6V or even lower, which reduces the charging power and reduces the charging quality.
Continue to map:
The shell is metallic. You are understanding, new, just bought, where willing to split it ... ...
The total charging power is 60W. 6 USB ports, the top is the QC3.0 fast charge, backward compatible QC2.0, fast charging power is 18W; other 5 ports are speed charge, maximum support 5V voltage, 2.4A current output, speed speed charge Power is 42W.
Also with two harnesses, and double-sided adhesive.
The family often needs to recharge the equipment, see below
MX5, Fire Phone, 6, Repeater,
Priv,6S,PW,
If you try it with electricity, you can charge it. Some 0.5A, 1A, 1A, QC2.0, QC3.0 all come.
Priv supports QC2.0, the latest LeTV bi-directional fast-charged mobile power supply supporting QC3.0, the one that has been erected.
Can charge so many, the purpose is basically reached, the two weeks of noodles value......
The output voltage at the output of 5 speeds of no-load is about 5.15V. This is the voltage of the output terminal. It will be reduced to the end of the mobile phone. The length is related to the length of the charging cable. The quality is better. The voltage is 0.01-0.03V. Lowering, the difference of the line, will reach a 0.04-0.1V step-down, or even greater, and as the current increases will further reduce.
The following figure is connected to iphone6, voltage 5.16V, current 1.24A, wired compensation.
PS4 handle can also be charged, PS3 is not, see below:
Due to lack of voltage, current, and power meter, the performance test cannot be detailed. Please understand it.
Use one night, the shell is warm, no heat feeling, it may not be full power!
End, thank you...
